Steam For Frothing Milk; Steam For Heating Drinks; Preparing Hot Water - Bosch TCA6001 Operating Instructions Manual

Steam for frothing milk

q Push down sleeve a on nozzle 13.
q Fill the cup approx.
q Immerse nozzle 13 approx. 1 cm into
the milk.
q Slowly rotate function selector 2 to =.
The appliance now heats up for approx.
i
d
20 seconds.
Then the milk is frothed. The
is lit on display 3.
d
Risk of scalding!
When the function selector is set to =, the
nozzle may spurt slightly. Escaping steam is
very hot.
Do not touch nozzle 13 or direct at people.
q Slowly rotate the cup.
q End the process by rotating the function
selector 2 back to
Note: When nozzle 13 has cooled down,
clean immediately. Dried residue is difficult
to remove.
Tip: Preferably use semi skimmed milk.

Steam for heating drinks

q Push up sleeve a on nozzle 13.
q Immerse nozzle 13 deep into the liquid
which is to be heated.
q Slowly rotate function selector 2 to =.
The appliance now heats up for approx.
i
d
20 seconds.
Then the liquid is heated. The
is lit on display 3.
20
1
/ full of milk.
3
flashes on display 3.
d
symbol
z
.
flashes on display 3.
d
symbol
d
Risk of scalding!
When the function selector is set to =, the
nozzle may spurt slightly. Escaping steam
is very hot.
Do not touch nozzle 13 or direct at people.
q End the process by rotating the function
selector 2 back to
Note: When nozzle 13 has cooled down,
clean immediately. Dried residue is difficult
to remove.

Preparing hot water

q Place an appropriate cup under the nozzle
13.
q Push down sleeve a on nozzle 13.
q Rotate function selector 2 to 0 and fill
the cup.
d
Risk of scalding!
When the function selector is set to 0, the
nozzle may spurt slightly. Do not touch nozzle
13 or direct at people.
q End the process by rotating the function
selector 2 back to
z
.
z
.