Wine Storage Equipment - Sub-Zero ICB424 Installation Instructions Manual

Wine Storage Installation
Important Note
To ensure the safe and efficient installation of Sub-Zero
equipment, please take note of the following types of
highlighted information throughout this guide:
IMPORT NT NOTE highlights information that is
especially relevant to a problem-free installation.
C UTION signals a situation where minor injury or
product damage may occur if instructions are not
followed.
W RNING states a hazard that may cause serious injury
or death if precautions are not followed.

Wine Storage Equipment

The importance of the installation of the Sub-Zero wine
storage unit cannot be overemphasized. Installation
should be done by a qualified installer.
Before you begin the installation process, it is recom-
mended that you read this entire installation guide. There
are key details that you should take special care to
observe during the installation. By reading these instruc-
tions carefully, you will make the installation process
easier, problem-free and, most importantly, safe.
ny questions or problems regarding the installation
should be directed to your Sub-Zero dealer.
Important product information, including the model and
serial number of your unit are listed on the product rating
plate. For models ICB424 and ICB424FS, the rating plate
is located on the underside of the top wall. For models
ICB427, ICB427R and ICBWS-30, it is attached to the
underside of the control panel. Refer to the illustrations.
R TING PL TE
R TING PL TE
Models ICB424 and Models ICB427, ICB427R and
ICB424FS. ICBWS-30.
4