Maintenance; Cleaning And Maintenance; Cleaning - Qualcast GT2826 Instruction Manual

Maintenance

Cleaning and Maintenance

Always disconnect the plug from the mains socket before working on the trimmer.
Any work that is not described in these Instructions must be carried out by a competent
repair shop. Only use original parts and be very careful with the line cutter during
installation work. Danger of injury!

Cleaning

Do not spray water onto the trimmer and do not clean it under flowing water. This would
result in the danger of an electric shock and the trimmer could be damaged.
Always keep the trimmer clean. Do no use cleaning agents and solvents.
• After the work has been completed remove all grass and soil from the cutting device and the
protective cover.
• Ensure that the ventilation slots are always clean and free of grass.
• Clean the trimmer with a soft brush or a cloth.
Exchanging the Cutting Device
Never manipulate the cutting device by inserting worn out parts. We recommend you use
original genuine parts. Never use metal lines.
Customer Helpline 0845 077 8888
15