Maintenance And Storage; Service; Preparing To Operate The Hedge Trimmer; Step 1 - Removing The Blade Sheath - Qualcast SHT19 Assembly Manual

Safety Information
Important - Please read these instructions fully before operating or maintaining

Maintenance and Storage

a) Maintain tools with care. Keep tools clean and in good condition for better and safer
performance. Follow the instructions for maintenance and changing accessories. Keep handles
and switches dry, clean and free from oil and grease.
b) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
c) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
d) Store the appliance with battery pack fully charged.

Service

a) Have your tool repaired by an authorized service agent. This tool is manufactured in
accordance with the relevant safety regulations. To avoid danger, electrical appliances must only
be repaired by qualified technicians.
b) DO NOT attempt to open the charger. There are no customer serviceable parts inside.
Return to any authorized service center.
Customer Helpline 0845 034 2279
8
www.gardenservicecentre.co.uk

Preparing to Operate the Hedge Trimmer

Step 1 - Removing the blade sheath

WARNING! Always wear safety gloves when doing any work on the hedge trimmer.
WARNING! Always disconnect the the battery pack from the tool before doing any work on the
hedge trimmer.
Remove the blade sheath from the blade of appliance carefully .
Customer Helpline 0845 034 2279
www.gardenservicecentre.co.uk
9