Operating Instructions - TrekStor i.Beat cody Operating Instructions Manual

OPERATING INSTRUCTIONS

Note: Please charge your MP3 player as described in these operating instructions for at least 3 to 4 hours before
initial use.
EN
1) Controls for the TrekStor
D E
C
B
A
Note: To reset, carefully press the
button is recessed deeply in the housing.
2) Connecting the TrekStor
Use the included USB cable to connect your MP3 player to an USB port in your PC. Your operating system
automatically detects the MP3 player and adds to "m
for your MP3 player and another for the SD/MMC slot.
3) Load the TrekStor
The MP3 player starts charging as soon as you connect it to a PC. The battery is charged after a maximum
of 3 to 4 hours; charging automatically stops to prevent overcharging.
Note: The maximum battery life is only reached after approximately 10 charging cycles.
4) Exchanging data with the TrekStor
Files that are not copy-protected
a) Select the desired files (such as MP3) with the mouse. Copy these files by clicking them with your right
mouse button ("c
b) Under "m
y
c) Click it with your right mouse button, and select "p
data will be available on your MP3 player.
i.Beat cody
V–
MIC RESET
F
button with a pointed object (such as an unbent paperclip). The reset
y
i.Beat cody
i.Beat cody
").
opy
c ", select the device with removable storage, "
omputer
A)
V+
B)
C)
G H I J
D)
E)
F)
K
G)
L
H)
I)
M
J)
N
K)
O
L)
M)
N)
O)
to a PC
c " the two "d
y omputer
i.Beat cody
" to start copying. After copying is completed, the
Aste
– 14 –
TFT display
USB port
Headphone jacks
Loop for neck strap
Microphone
button
y
Volume wheel/scroll wheel
button
I
button
K
button
A
button
J
button
L
button
i
Slot for SD/MMC cards
Speaker
r
eVices With emoVAble
.b ".
i eAt cody
s ": one
torAge