Operating Instructions - TrekStor i.Beat move Operating Instructions Manual

OPERATING INSTRUCTIONS

Please note: Please charge your MP3 player as described in these operating instructions for at least 3 to 4 hours
before initial use.
EN
1) Controls for the TrekStor
Please look at the illustrations on the inside of the unfolding cover.
A) TFT display
B) g button
C) Q button
D) O button
E) A button
F) P button
G) R button
2) Connecting the TrekStor
Use the included USB cable to connect your MP3 player to a USB port on your computer.
i.Beat move S: Your operating system automatically recognizes the MP3 player and adds a "r
or "d " to "m
rive
i.Beat move M | L: Your operating system automatically recognizes the MP3 player and adds two "r
or "d " to "m
rives
3) Load the TrekStor
The MP3 player starts charging automatically as soon as you connect it to a computer. The battery is
charged after a maximum of 3 to 4 hours; charging stops automatically to prevent overcharging.
Please note: The maximum battery life is only reached after approximately 10 charging cycles. No operating menu
can be accessed during the time your MP3 player is connected to the computer.
4) Installing / removing the microSD card
(TrekStor
Slowly insert the microSD card into the slot until you hear the card lock into place. To remove the microSD
card from the slot, briefly push the microSD card and slowly pull it out of the slot.
H) w switch
I) Earphone jack
J) Loop for neck strap
K) Microphone
L) USB port
M) Slot for microSD card
(i.Beat move M | L only)
C "/"C " or "d
y omputer omputer
C "/"C " or "d
y omputer omputer
i.Beat move
i.Beat move M | L
i.Beat move
i.Beat move
".
esktop
": one for your MP3 player and another for the microSD slot.
esktop
)
– 20 –
to a computer
emovAble medium
"
"
emovAble mediA