Operating Instructions - TrekStor i.Beat emo 2GB User Manual

OPERATING INSTRUCTIONS

Note: Please charge the i.Beat emo as described in these operating instructions for at least 3 to 4 hours before
initial use.
EN
1) Controls for the TrekStor
Note: To reset, carefully press the
button is recessed deeply in the housing.
2) Connecting the TrekStor
Note for Windows® 98 users: First install the drivers from the accompanying CD before connecting the i.Beat emo
to your PC.
Use the included USB cable to connect the i.Beat emo to a USB port in your PC. Your operating system will
automatically recognize the i.Beat emo and will add a "d
3) Load the TrekStor
The i.Beat emo starts charging as soon as you connect it to a PC. The battery is charged after a maximum
of three to four hours; charging automatically stops to prevent overcharging.
Note: The maximum battery life is reached only after approximately 10 charging cycles.
4) Exchanging data with the TrekStor
Files that are not copy-protected
a) Select the desired files (such as MP3) with the mouse. Copy these files by clicking them with your right
mouse button ("c
b) Under "m
y
c) Click it with your right mouse button, and select "p
will be available on the i.Beat emo.
i.Beat emo
button with a pointed object (such as an unbent paperclip). The reset
y
i.Beat emo
i.Beat emo
").
opy
c ", select the device with removable storage "t
omputer
A) Headphone jack
B) Loop for neck strap
C) USB port
D) CSTN Display
E) switch (key lock)
q
F) Microphone
G) button
E
H) button
;
I) button (Play / Pause)
X
J) button
F
K) button
,
L) button
5
M) / button
/ B
N) button
y
to a PC
r
eVice With emoVAble
i.Beat emo
s
reK
" to start copying. After copying is over, the data
Aste
– 10 –
s " under "m c
torAge y
.b ".
tor i eAt emo
".
omputer