Intended Operating Conditions; Power Supply - TrekStor i.Beat jump BT Manual

p
Exposing the device to electrostatic discharge can
interrupt the data transfer between the device and
the computer or impair the functions of the device.
Should this happen, disconnect the device from
the USB port and reconnect it or rebuild the WiFi
connection from scratch.
Repair
WARNING
No parts inside the device require maintenance or
cleaning.
WARNING
Should the device become wet, turn it off immediately.
Ensure the device is checked for operational safety
before using it again.

Intended operating conditions

j
Protect the device from extremely high or low
temperatures and fluctuations in temperature.
Use it at an ambient temperature between 10º C
and 40º C.
m
Do not place the device near a heat source and protect
it from direct sunlight.
e
Never expose the device to humidity, condensation
or moisture.
h
Ensure you use and store the device in a dust-free
environment.

Power supply

CAUTION
Do not use or charge the device if the battery is
damaged or leaks.
EN 26