Safety Screen Install; Glass Door Removal/Install - Regency L234-NG10 Owners & Installation Manual

installation
|
18

SAFETY SCREEN INSTALL

1. Slide the folded tab on the screen assembly over the tab on the glass door
(left and right sides).
Tab on screen assembly
Folded Tab on screen assembly
2. Install screen assembly and glass door together and secure with spring
hooks on left and right side. To remove see "Glass Door Removal"
instructions.
18 |
Regency L234-10 Direct Vent Gas Insert
®
Tab on glass door
Tab on glass door
Spring Hook

GLASS DOOR REMOVAL/INSTALL

1. Remove the glass door.
a) Pull the spring hook on the left that holds the door in place. Place
the hook into the opening towards the outside of the bracket.
.
Repeat on right side
Spring Hook
Outside opening
b) Swing the door out 45 degrees and lift up
and out.
2. To reinstall–reverse steps.