Adjusting Cutting Height; Towing - Scag Power Equipment STT61V-25KBD-SS Operator's Manual

Section 4

4.13 ADJUSTING CUTTING HEIGHT

The mower deck can be adjusted from a height of 1-inch
to 6 inches at 1/4-inch intervals. To adjust the cutting
height:
1. Push the cutting height adjustment foot pedal all the
way forward using your right foot until it locks in
place. (Figure 4-6).
2. Insert the lanyard pin into the cutting height index at
the desired cutting height. Push forward on the deck
lift foot lever, hold in place and lift up on the deck
release lever, (Figure 4-7). Slowly release the foot
pedal. A deck height decal is located on the cutting
height index as an aid in adjusting the deck to the
desired height. (Figure 4-6).
HEIGHT ADJUSTMENT PEDAL
Figure 4-6 Adjusting Cutting Height
LANYARD
PIN
390S0140-2
19
DECK RELEASE
LEVER
Figure 4-7 Deck Release Lever
4.14 Towing (optional hitch accessory)
1. Never allow children or others in or on towed
equipment.
2. Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point.
3. Follow manufacturer's recommendations for weight
limit for towed equipment. 250/lbs. maximum towing
weight.
4. Never tow on slopes. The weight of the towed
equipment may cause loss of traction and loss of
control.
5. Travel slowly and allow extra distance to stop.
6. Zero-turning with a trailer attached could cause
damage to the trailer or mower.
390S0151-1