Table of Contents
Advertisement
Remote cable
The cable between the remote and the rack unit is a standard Ethernet Cat-5/6 UTP cable with
RJ–45 connectors.
However the signal protocol between the remote and rack is RS-232 not Ethernet. The remote
cable has been tested to 50 ft.
Warning: Do not plug the remote or rack unit into an Ethernet port. It was not designed for
this, and doing so may damage the port or unit.
Quick setup and use
The AMC comes with six default presets.
Any preset can be reconfigured to analog, digital or a mix
The display will show a brief description of the selected presets. These presets can be modified on
a limited basis using the menu on the remote, or completely reconfigured using the AMC Control
Software.
Page 8
Advertisement
Table of Contents
