Table of Contents
Advertisement
Target Curves
The SRO optimizes a speaker to a target curve, which sets the desired frequency response.
Target curves can be created using the presets buttons (along the bottom of the screen) or
manually created by activating and configuring the various filters.
To review or adjust the Target curve for any speaker, click on the target curve, which will bring up
the following screen.
In all AMC control software above rev 4.11, all target curves are saved to a file when any target
curve is modified. Therefore, when you re-start the AMC control program in a new session, the
program will remember your target curves without having to re-create them from scratch.
The target screen contains the following items:
Target Filters – the target filters are used to create the target curve. In many situations the target
filters are automatically selected from the values entered in the bass management panels. In
addition there are preset buttons along the bottom of the target curve panel.
If the target curves are not appropriate for your application, you can construct a custom target
curve using any or all filters. Any changes to the filters are automatically reflected in the graph at
the top of the screen
Page 30
Advertisement
Table of Contents
