The Sro Main Screen - BLUE SKY AMC Instruction Manual

The SRO Main Screen

This screen shows the current state of the EQ, target filters, measured frequency response and
corrected frequency response of all the channels. Clicking on the any of the small graphs will open
up a larger graph.
NOTE: You can't optimize a channel until you measure the channel.
The SRO screen has the following features and operations:
Frequency response - displays the measured and corrected frequency response of the selected
speaker.
Target - displays the desired frequency response after correction.
EQ - the electrical EQ with the speaker.
Select - determines whether the speaker will be measured and/or optimized.
Measure - measures the frequency response of the selected speakers.
Optimize - starts the SRO optimization process. This box will be de-activated until a measurement
has been made.
Page 28