Table of Contents
Advertisement
AMC I/O connections
The AMC I/O connections use Tascam DB25 connectors for both analog and digital. These DB25
cables are not supplied.
Channel assignments
The channel assignments are SMPTE standard
1) Left
2) Right
3) Center
4) LFE
5) Left Surround
6) Right Surround
7) Left Rear
8) Right Rear
The channel assignments match the labels on the remote.
However, these channels labels are for reference only. Any channel can be used for any purpose
desired. The only exception is the LFE channel which includes the bass management filters. Since
these filters can be disabled (using the AMC Control Software), the LFE channel can be
reconfigured as a standard channel like the others.
Analog I/0
The analog inputs and outputs are balanced with a switchable maximum level of +12/+24 dBu.
Both analog and digital outputs are active irrespective of whether the inputs are digital or analog.
Digital I/0
The digital inputs and outputs are AES/ EBU 110 ohm and transformer isolated. All digital inputs
have an integrated sample rate converter that automatically converts incoming sample rate to the
internal AMC sample rate. The internal sample rate can be set as a global parameter to 48 kHz or
96kHz through the menu on the remote.
NOTE: Setting the sample rate, 48 kHz or 96 kHz, will reset the AMC rack unit and load the new
sample rate into the software program.
Page 6
Advertisement
Table of Contents
