Table of Contents
Advertisement
Cross Mixer
The cross mixer screen shows the routing of each input to each output in gain in dB. The gain can
be entered directly in the box or to mute an input type in "off" or"OFF" in the box.
If bass management is turned OFF (see Bass Management), the non -LFE feeds to the LFE
output channel will be disabled and displayed in red indicating that they cannot be changed. If in
this state, the user will have to go to the base management screen and turn bass management ON
before these values can be edited.
The gray buttons along the bottom of the screen configure the mixer to a variety of common
setups. These buttons only program the cross mixer and do not affect the bass management
settings.
To go back to the main AMC control screen click the X in the upper right-hand corner of the screen
Page 18
Advertisement
Table of Contents
