Table of Contents
Advertisement
GB
CLEANINg,.DESCALINg
1
AND.ChANgINg.FILtER
AS.REquIRED
With this function, descaling
or cleaning can be started
at your own discretion or a filter
replacement can be carried out.
Switch off the device first.
4
This display can be ex-
ited by pressing the On/Off
button,
without
starting
a
function.
Briefly press rinse button
repeatedly, if necessary,
until the desired symbol
lights up.
56
Bedienungsanleitung_GB.indd 56-57
2
3
Off
Press the on/off and rinsing
Descaling symbol lights up
button together.
on the display.
5
6
Descaling: see
steps on page 52
from image 5.
Cleaning: see
steps on page 49
from image 5.
Filter change:
see steps on
page 54 from
at.least.3.sec.
image 5. The filter symbol
Keep rinse button pressed
only appears, if the
for at least 3 seconds, to
parameter "water filter -
start the selected function.
on" was previously set.
1
2
Off
Switch off the device first.
Press the black tea button
and on/off button at the
same time.
4
5
at.least.3.sec.
Briefly press black tea
To save, press the black
button repeatedly until the
tea button for at least 3
desired water hardness
seconds.
appears.
Water.hardness.over-
EN
view
Hardness range
Water hardness in
Water hardness in German degrees
mmol
1 – soft
< 1.3
2 – medium
1.3 – 2.5
3 – hard
2.5 – 3.8
SEt.PARAmEtERS:
3
WAtER.hARDNESS
Water hard-
Display symbols
ness
soft
medium
hard
Current water hardness is
displayed (see table).
The set water hardness and
the water filter determine
6
the amount of water used for
descaling:
Water Consumption
Water
[l]
hardness
with/without water
filter
soft
120
medium
80
hard
40
To confirm, all beverage
symbols will blink once.
Factory setting: hard
To cancel the setting, press
DE
the on/off button.
of hardness (° d)
Ask your water company for
more detailed information
< 7
about your water hardness. The
7–14
water hardness entered in the
14 – 21
device determines the necessary
descaling frequency for optimal
operation.
GB
1200
800
400
57
28.05.15 15:40
Advertisement
Table of Contents
