Table of Contents
Advertisement
GB
CLEANINg.WhEN.
9
PROmPtED.(2)
Risk of scalding!
Very hot cleaning fluid.
Press rinse button.
The blue-green water is
12
characteristic of the current
cleaning process.
Cleaning process
continues.
Health risk!
15
Do not drink cleaning fluid.
The device rinses with 200
ml of water.
Risk of scalding!
Very hot water.
Empty the container and
replace it back under the
spout.
50
Bedienungsanleitung_GB.indd 50-51
10
11
2.min.
Cleaning capsule is filled
2 min. pause for the expo-
with hot water.
sure of the cleaning fluid.
13
14
Wait until rinse symbol
Open lever, eject cleaning
flashes.
capsule and close lever
again.
16
17
Press rinse button.
Wait until the rinsing
process is complete.
18
19
max.
3.5.l
Remove and empty con-
If needed, fill the tank with
tainer. Remove water tank.
fresh water.
21
22
Move spout to uppermost
Remove drip trays and
position.
capsule container.
8
24
25
4.x
Empty all containers.
Clean all parts. Place drip
trays and capsule container
back into the device.
CLEANINg.WhEN.
PROmPtED.(3)
To
finish
the
process, the water tank
must be removed and reinserted.
Subsequently
the
device
switch off automatically.
Insert water tank into the
device.
Risk of damage!
23
Before removing the drip
trays, it must be ensured that
the spout is in the uppermost
position.
Take apart drip trays.
Risk of scalding!
11
26
Very hot water.
Risk of damage!
Only use a damp cloth
and a mild detergent if necessary
(do not use abrasive or aggressive
cleaning agents). Do not put any
parts of the device in the dish-
washer.
Wipe clean device with a
slightly damp cloth.
GB
cleaning
will
51
28.05.15 15:40
Advertisement
Table of Contents
