Teekanne K-fee 21 Original Operating Instructions page 11

Table of Contents

Advertisement

GB
DESCALINg
1
WhEN.PROmPtED.(1)
Health risk!
Read the instructions for
descaling carefully and follow the
safety instructions.
If descaling is cancelled by
The device automatically prompts for descaling.
pressing the on/off button,
It takes into account the set water hardness and
the device will automatically return
whether a water filter is used.
to descaling mode the next time it
3
is turned on.
Risk of damage!
Before removing the drip
trays, it must be ensured that
the spout is in the uppermost
position
.
To shut off, briefly press the
on/off button.
The water filter must be
6
removed before descaling.
Empty container and
reinsert in machine.
52
Bedienungsanleitung_GB.indd 52-53
2
Only.
use.
descaler.
that.
is.
suitable.
for.
the.
device.. .
For. more. information,. please. visit.
our.website.at:.
www.tealoungesystem.com
Devices shows descaling
prompts on the display.
4
5
Off
Press the on/off and rinsing
Remove drip trays with
button together.
capsule container.
7
8
11
8
Remove and empty the
Fill water tank with descal-
water tank.
ing agent (100 ml) and 0,4
litres of water.
9
Re-insert the water tank.
Place a container under
the spout.
12
Clean water tank, fill (at
least 0.3 litres) and re-insert
it into the device.
15
0.4.l
Place a container under
the spout.
Press rinse button.
10
11
Press rinse button.
Wait until the rinsing
process is complete.
Then, empty the container.
13
14
Remove drip trays.
Empty drip trays, clean
and replace with capsule
container.
16
8
17
11
Wait until the rinsing
Remove the water tank, fill
process is complete.
up and replace. The descal-
Then, empty the container.
ing symbol disappears.
DESCALINg
GB
WhEN.PROmPtED.(2)
Risk of scalding!
Very hot water.
Health risk!
Do not drink descaling
fluid.
The machine rinses, in
intervals until the water
tank is empty.
Risk of damage!
Before removing the drip
trays, it must be ensured that
the spout is in the uppermost
position.
Risk of scalding!
Very hot water.
Rinse the device with 250
ml of water.
To finish the descaling
process, the water tank
must be removed and reinserted.
53
28.05.15 15:40

Advertisement

Table of Contents
loading

Table of Contents