You are helping to protect the environment
with your Gigaset handset.
Reducing energy consumption
By using a power-saving adapter plug, your
telephone consumes less power.
(dependent on base)
The radiation can only be reduced if your
base supports this function.
The transmission power of your telephone is
automatically reduced depending on the
distance to the base.
You can reduce the radiation of the handset
and base even further by using Eco Mode .
For further information, please refer to
your base user guide.
Setting the alarm clock
Prerequisite: The date and time have
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
You can enter data in the following fields:
Select On or Off.
Enter the wake-up time in 4-digit format.
Use the display key to select AM or PM.
Use the right and left arrows on the con-
trol key to set the volume.
Select the melody to play as the alarm
Press the display key.
In idle status, the
A wake-up call is signaled on the display and
with the selected melody (
wake-up call sounds for 60 seconds. If a key
is not pressed, the wake-up call repeats
twice at five minute intervals and then
During an active call, the wake-up call is only
signaled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze
Prerequisite: A wake-up call is sounding.
Press the display key. The wake-
up call is deactivated.
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
icon and wake-up time
page 3). The