Maintenance - Pacific WAV-30 Parts & Operating Manual

WEEKLY:
1. Inspect and clean the two vacuum inlet filters. Remove the cover from the machine. The filters are now accessible (see
page 10). They are constructed of foam attached to a plastic mounting ring. Slide the filters off and clean by shaking or
vacuuming. Replace if there are any rips, tears or can't be cleaned.
2. Inspect and clean the exhaust filter. It is located under the handle on the top of the machine (see page 8). Remove the
filter and clean by shaking, vacuuming or washing with water. Replace if there are any rips, tears or if it can't be cleaned.
VACUUM MOTOR MAINTENANCE:
Have the vacuum motors inspected annually by a factory authorized service technician. If the carbon brushes are worn, they
should be replaced. This service will prolong the life of the motor.

MAINTENANCE

5