Console Features - Schwinn AirDyne Pro Owner's Manual

Console Features

The Console provides information about your workout on the display
screens.
Programs
• Manual
• 20/10 Interval
• 30/90 Interval
• Custom Interval
• Time Target
• Heart Rate Zones
• Calorie Target
• Kilojoules Target
• Miles Target
• Kilometers Target
Tachometer Display
1. LCD tachometer display—the meter is divided into 60 segments
to show CAL/MIN and WATTS metrics for the current workout
performance. For CAL/MIN values the meter utilizes two linear
scales: each large tick mark segment (0-30) indicates 1 calorie/
minute, and each small tick mark segment (30-60) indicates 1
calorie/minute.
2. Tach metric labels—indicate the type of values currently shown in
the Tach metric display:
• AVG— the Average values display only during workout summary.
• SCAN—in Scan mode the tach automatically moves through the
rate metrics. Each rate display shows for 3 seconds.
• MAX—the Maximum values display only during workout summary.
3. Tach metric display—shows the numeric values for the following rates:
• CAL/MIN—the estimated calories burned per minute (based on the Watts metric). The maximum display is 999.9.
• WATTS—the power that you are producing at the current resistance level (1 horsepower = 746 watts). Maximum value
is 9999.
• RPM— the machine revolutions per minute (RPM). The maximum display is 9999.
• SPEED— the machine speed in kilometers per hour ( "KM" ) or miles per hour ( "MI" ), to one decimal place—for ex-
ample, 3.4 or 10.5. The maximum display is 999.9.
4. Tach hill—represents the user's RPM performance on a 1-100 linear scale (divided into 10 segments).
5. MAX CAL/MIN tick mark—the highest tick mark achieved (on the LCD tachometer display) stays on to show the maximum
effort during the current workout.
1
2
3
Tachometer
Display
Program
Data Display
Keypad
4
5
17