Setting Up The System - Denon AVC-A1SR Operating Instructions Manual

Remote control unit
• For details, refer to the separate (supplied) RC-871 operating instructions.
q
w
e
r
t
q
Transmitter
w
Touch panel
e
CHANNEL up/down buttons
r
MUTE button
t
USB terminal
7

SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS"
(see pages 4 to 8), make the various settings described below on the monitor screen using the AVC-A1SR's
on-screen display function.
These settings are required to set up the listening room's AV system centered around the AVC-A1SR.
• Use the following buttons to set up the system:
Screen while icons are displayed
o
y
u
!0
i
y
Jog stick (PUSH ENTER)
u
VOL. (volume) up/down buttons
i
LIGHT (back light) button
o
Reset button
!0
Battery cover
Transmission codes
of independent buttons
CHANNEL• : Tuner preset
CHANNELª : Tuner preset
VOL• : Main volume of AV amplifier
VOLª : Main volume of AV amplifier
MUTE : Muting of AV amplifier
• System setup items and default values (set upon shipment from the factory)
System setup
Input the combination of speakers in your
system and their corresponding sizes (Small for
Speaker
regular speakers, Large for full-size, full-range) to
automatically set the composition of the signals
Configuration
output from the speakers and the frequency
response.
Use this function when using multiple
Surround
surround speaker combinations for more
mode
ideal surround sound. Once the
(Surround
combinations of surround speakers to
q Speaker
be used for the different surround
Setting)
modes are preset, the surround
Surround
speakers are selected automatically
speaker
according to the surround mode.
Set the frequency (Hz) below which the bass sound
Crossover
of the various speakers is to be output from the
Frequency
subwoofer.
Subwoofer This selects the subwoofer speaker for playing
mode deep bass signals.
This parameter is for optimizing the timing with
which the audio signals are produced from the
w
Delay Time
speakers and subwoofer according to the listening
position.
This adjusts the volume of the signals output from
Channel
e
the speakers and subwoofer for the different
Level
channels in order to obtain optimum effects.
When using a THX Ultra2
Boundary
Gain compatible subwoofer, set the
compensation
subwoofer's frequency response.
THX Audio
r
Setup
Surround
When using two surround back
Back
speakers, set the distance of the
Speaker
two speakers.
Position
This parameter is for detecting the maximum level
Subwoofer
of the low bass signals output from the subwoofer
t
Peak Limit channel in order to protect the subwoofer from
damage and prevent unpleasant distorted sounds
Lev
from being produced.
Input
source
Digital In This assigns the digital input jacks for the
y
Assignment different input sources.
Digital
Inputs
Video Input Set the input signal to be output from the monitor
u
Mode output terminal.
Adjust the time delay of the video and audio
i
Audio Delay
signals.
Multi Zone1 This sets the output level for the
vol. Level multi-zone1 output jacks.
Multi Zone
o
Control
Set this to switch the surround
Power AMP
back channel's power amplifier for
Assignment
use for multi-zone2.
Auto
!0
Surround Auto surround mode function setting.
Mode
Ext. In
!1
Set the Ext.In terminal playback method.
Setup
Digital Multi
!2
Digital multichannel input setting.
Ch In
This sets whether or not to display the on-screen
On Screen display that appears on the monitor screen when
!3
Display the controls on the remote control unit or main unit
are operated (from MONITOR 1 outputs only).
Set whether or not to lock the system setup
!4
Setup Lock
settings so that they cannot be changed.
Default settings
Front Sp. Center Sp. Sub Woofer Surround Sp.
Small Small Yes Small Small / 2spkrs
MULTI
DOLBY/
DSP
THX WIDE 5CH/7CH
DTS CH
THX 5.1 SCREEN STEREO
SIMULATION
SURROUND
DIRECT
A A A A A A
FIXED —THX—
LFE —THX—
Front L & R Center Sub Woofer Surround L & R
3.60 m (12.0 ft) 3.60 m (12.0 ft) 3.60 m (12.0 ft) 3.00 m (10.0 ft)
Surround Surround Surround Surround
Front L Front R Center
L R Back L Back R
0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB
THX Ultra2 Subwoofer = NO
The Distance Between SBL/SBR = 0 m to 0.3 m (0 ft to 1 ft)
Peak Limiter = OFF
DBS/
CD DVD VDP TV VCR-1 VCR-2 VCR-3 V. AUX TAPE-1
SAT
COAXIAL COAXIAL COAXIAL OPTICAL OPTICAL OPTICAL OPTICAL COAXIAL COAXIAL OPTICAL
1 2 3 1 2 3 4 4 5 5
AUTO
Audio Delay = 0 ms
Variable
Surround Back
Auto Surround Mode = ON
MODE = DSP, S.Back = NOT USED, SW Level = 15 dB, INPUT Vol. = 0 dB
DENON Link = OFF, Digital Ext. In = OFF
On Screen Display = ON
Setup Lock = OFF
ENGLISH
Surround
Back Sp.
— —
— —
SBL & SBR
3.00 m (10.0 ft)
Subwoofer
0.0 dB
TAPE-2 TUNER
OPTICAL
OFF
6
9