Viking Professional & Designer 200 Series Installation Manual page 8

Hide thumbs Also See for Professional & Designer 200 Series:

Table of Contents

Trim Installation Options (cont'd.)

(not available on all units)

Dishwasher will ship with trim installed for panel flush install. If needed,

To install dishwasher cabinet flush with trim, remove the 6 screws and washers (3

attach wiper gasket by pulling protective film off adhesive back on wiper

per side) holding side trim on. Shift the side trim forward. Use rear hole on side

gasket and apply behind hemmed edge of side trim.

trim and the same hole on dishwasher to reattach trim. If needed, attach wiper

gasket by pulling protective film off adhesive back on wiper gasket and apply

behind hemmed edge of side trim.

Table of Contents