Summary of Contents for Viking Designer 200 Series
Page 1
Viking Installation Guide Professional & Designer 200/325/450 Series Built-In Dishwashers...
Page 2
An electric rating plate specifying voltage, hertz, and amps is attached to the product. Wiring the dishwasher with more voltage than it is W A R N I N G rated for may cause severe damage. To...
Page 3
Please Read and Follow! W A R N I N G W A R N I N G W A R N I N G Please Read and Follow! shall be used if required by NFP -70 (National Electric Code), federal/state/local laws, or local ordinances.
Page 6
W A R N I N G Plumbing connections must comply with C A U T I O N applicable sanitary, safety, and plumbing The dishwasher has a factory installed codes. backflow preventer. Do Not add an additional check valve.
Page 7
NOTE: UL approved strain relief NOTE: Green Ground NOTE: Black Green White Ground Common...
Page 10
Front Panel Attached Front Panel Removed Front Panel Attached Front Panel Removed 1.0” (2.5 cm) Minimum 20” (50.8 cm) from floor Cut here for 3/4” Cut here for 5/8” (1.6 cm) (1.9 cm)
Need help?
Do you have a question about the Designer 200 Series and is the answer not in the manual?
Questions and answers