JUKI cp-180 Instruction Manual And Parts List page 33

(3) Overlapped stitching pattern
A C
B
4) Depress the front part of the pedal once, and the sewng machne wll repeat the normal sttchng and re-
verse stitching by the predetermined times. Then, the sewing machine will automatically make the thread
trmmer actuate and wll stop to complete the overlapped sttchng procedure. (The one-shot automatc
sttchng cannot be turned OFF.)
5) If thread trmmng prohbtng functon 4 s chosen, the machne wll stop wth the needle up upon com-
pleton of the overlapped sttchng procedure wthout performng thread trmmng.
1
C
B
D
2 3
) Press overlapped sttchng pattern swtch 1 to
specfy the overlapped sttchng pattern.
2) The overlapped sttchng pattern s selected, and
the number of sttches and data on overlapped
stitching which have already been specified are
shown on the panel.
3) If you want to change the number of sttches,
operate number of sttches settng swtches 2
for processes A through C, and to change the
number of repeated processes, operate the " + "
or " - " swtch of swtch 3 for settng the number
of processes D.
The range of the number of sttches A, B and C
that can be changed : 0 to 9 sttches.
The range of the number of processes D that
can be changed : 0 to 9 tmes.
- 7 -
4