JUKI cp-180 Instruction Manual And Parts List page 36

2
3
A
2 3
Table : Dsplay of modes
Mode name
Target No. of pcs. dsplay mode
(F00)
Target/actual No. of pcs.
dfference dsplay mode
(F200)
Sewng machne avalablty
rate dsplay mode
(F300)
Ptch tme dsplay mode
(F400)
A v e r a g e n u m b e r o f
revolutons dsplay mode
(F500)
4
1
B
5
4
6 1
Indcator A
Actual No. of pcs.
(Unt : Pece)
(*)
Dfference between target No.
of pcs and actual No. of pcs
(Unt : Pece)
(*)
- 0 -
< To display the production support modes >
) Keep swtch 1 held pressed (for one second) n
the normal sewng state to call up the one-touch
settng screen.
2) Then, press swtch 2 on the one-touch settng
screen to dsplay/hde the producton support modes.
3) Select the mode to be dsplayed/hdden by
pressng swtch 3 .
4) ON/OFF of the dsplay can be changed over by
pressng swtch 4 .
5) To return to the normal sewng state, press
swtch 1 .
F100 to F500 modes have been factory-set
to HIDE at the time of delivery.
< Basic operation of the production support modes >
Sewng can be performed wth the producton
support data dsplayed on the control panel.
) When swtch 1 s pressed n the normal sewng
state to enter the producton support mode.
2) Producton support functon (F00 to F500) can
be changed over by pressng swtch 2 .
3) The data with an asterisk mark (*1) in Table 1
"Dsplay of modes" can be changed by pressng
swtch 3 . The data with an asterisk mark (*2)
can be changed by swtch 4 or swtch 5 .
4) Refer to the Table 2 "Mode resettng operaton"
for the resettng procedure of data.
5) To return to the normal sewng state, press
swtch 1 .
Indcator B
Target No. of pcs.
(Unt : Pece)
(*2)
Target ptch tme
(Unt : 00 msec)
(*2)
S e w  n g m a c h  n e
a v a  l a b  l  t y r a t e  n t h e
prevous sewng
(Unt : %)
Ptch tme n the prevous
sewng
(Unt :  sec)
Average number of revolutons
n the prevous sewng
(Unt : st/mn)
Indcator B
(when swtch 4 or swtch 6
s pressed)
-
-
D  s p l a y o f a v e r a g e
avalablty rate of sewng
machne
(Unt : %)
Dsplay of average ptch
tme
(Unt : 00 msec)
Dsplay of average number
of revolutons
(Unt : st/mn)