Palmrest Assembly Installation
1. Align palmrest assembly (E) with the keyboard as shown in Figure 3-27.
2. Connect touchpad FFC (C) to touchpad module connector (D)
3. Put palmrest onto lower cover.
4. Install and secure two (2) screws (B) to lower cover.
5. Install and secure six (6) screws (A) to lower cover.
6. Install HDD module.
7. Install base door.
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
3-28
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
Figure 3-27. Palmrest Assembly
ID
A
M2.45x8.0
B
M2.5x5.0
(Figure
3-25)
(Figure
(Figure
Size
Quantity
8
2
E
E
(Figure
3-26).
3-23)
3-22)
Screw Type
Machine Maintenance Procedures
0