Palmrest Assembly Installation
1. Align palmrest assembly (E) with the keyboard as shown in Figure 3-27.
Figure 3-27. Palmrest Assembly
2. Connect touchpad FFC (C) to touchpad module connector (D)
3. Put palmrest onto lower cover.
4. Install and secure two (2) screws (B) to lower cover.
5. Install and secure six (6) screws (A) to lower cover.
6. Install HDD module.
7. Install base door.
ID
A
B
3-28
(Figure
3-25)
Size
M2.45x8.0
M2.5x5.0
E
E
(Figure
(Figure
3-23)
(Figure
3-22)
Quantity
Screw Type
8
2
Machine Maintenance Procedures
0
3-26).