LCD (Liquid Crystal Display) Module Removal
Prerequisite:
+
IMPORTANT:
1. Disconnect WLAN antenna cables (A) from WLAN module connectors, refer to
Module Removal
1. Remove WLAN antenna cables (A) from guides (B) on lower cover (Figure 3-56).
A
2. Disconnect 3G antenna cables (A) from 3G module connectors. Refer to
Removal.
3. Place computer face up.
4. Remove adhesive tape on cables as required.
5. Guide WLAN antenna cable through opening (H). Refer to
6. Guide 3G antenna cables through opening (G). Refer to
7. Remove four (4) screws (C) from LCD module hinges (Figure 3-57).
C
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
Machine Maintenance Procedures
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
Speaker Module Removal
3G is not available in this model.
B
B
A
Figure 3-56. WLAN Module Cables
C
Figure 3-57. LCD Module Hinge Screws
B
3G Module
Figure
3-47.
Figure
3-47.
C
0
WLAN
B
C
3-53