Table of Contents
Advertisement
Handling precautions
These precautions are provided to ensure that performance
can be fully demonstrated. Thoroughly read these
precautions to ensure correct use.
■.Precautions.common.to.the.main.unit,.battery.pack,.
charging.equipment,.au.Micro.IC.Card.(LTE),.S.Pen,.
peripheral.devices
●
Do not apply excessive force to the product during use. Be sure
not to put the product into a tightly packed bag or place a heavy
object on the product in a bag. Sitting on the product in your
pocket might damage the display or internal circuit board resulting
in a malfunction. Keeping an external device connected to the
microUSB connection terminal or headset connection terminal
might damage the connector resulting in a malfunction. Such
damage and malfunction are not covered by the warranty, even if
there is no external damage.
●
Do not use the product in extremely hot, cold or humid places. （Use
within an ambient temperature range of 5℃ to 35℃ and humidity
range of 35% to 85%.）
●
Do not use in places subject to lots of dust or vibration.
●
Clean the connection terminals with dry cotton swabs, etc. every
now and then. Soiled terminals might cause poor connection.
Do not exert a strong force to clean the connection terminals to
prevent deformation.
●
Clean the product with a soft dry cloth (such as the type used
for eyeglasses). Forceful rubbing with a dry cloth may scratch
the display. The display may be stained if splash or smear is left
attached to the surface. Wiping the product using alcohol, thinner,
benzine, detergent, etc. might erase the printing on the outer
casing or cause discoloration.
●
Use as far away as possible from land-line phones, TVs, radios, etc.
Use nearby might affect them.
●
The product may become warm while charging or during other
operations, depending on the situation, but this is not abnormal.
16
●
When the product is used by a child, parents or guardians should
thoroughly read this manual or the full "Instruction Manual" (Japanese)
and teach the child how to use it.
●
Turn off the power before removing the battery pack. If you remove
the battery pack with the power on, saved data might be altered or
lost.
■.Main.unit
●
Do not forcefully press, tap or intentionally subject the display to
strong impact. Doing so might cause scratching or damage.
●
Do not forcefully press your fingernails, sharp objects or hard
objects against keys or display surface. Doing so might cause
scratching or damage. The touch panel is designed to be lightly
touched by fingers or S Pen. Do not apply strong pressure with
your fingers or sharp-pointed objects (such as fingernails, ballpoint
pens and pins) on the touch panel.
In the following cases, the product may not respond to touching
the touch panel, or errors in operation may occur.
• Operation with gloved hands
• Operation with fingernails
• Operation with a foreign object placed on the touch panel
• Operation with a protective sheet or sticker on the touch panel
• Operation with wet or sweaty fingers
●
Do not remove the stickers printed with IMEI (International
Mobile Equipment Identity) that can be seen when the battery
pack is removed. These stickers prove that the product and the
communication module you are using comply with the Wireless
Telegraphy Act and Telecommunications Operations Act.
Advertisement
Table of Contents
