Table of Contents
Advertisement
◎ Attaching in the wrong way may damage the battery pack and
cover.
◎ Align each tab with the groove and push along the edges not to
leave spaces between the cover and the phone.
Removing the battery pack
1
Remove the back cover
2
Put your finger on the battery pack using
the groove of the product and lift the battery
pack in the direction of the arrow to remove
au Micro IC Card (LTE)
Your phone number etc. is recorded
in the au Micro IC Card (LTE).
• The product is compliant with
au Micro IC Card (LTE) only.
You cannot use the product
by inserting the au IC-Card and
micro au IC-Card for au phones
and smartphones instead.
28
Groove
au Micro IC Card (LTE)
(Front
side)
IC (metal)
part
(Back
side)
◎ Power off the product and remove the battery pack before
attaching/removing the au Micro IC Card (LTE).
◎ Note the following points, otherwise handling the au Micro IC
Card (LTE) may cause malfunction or damage.
• Do not touch the IC (metal) part of the au Micro IC Card (LTE)
or the IC card terminal inside the product.
• Insert in the correct direction.
• Do not use force to attach or remove.
◎ Do not lose the au Micro IC Card (LTE) after it has been
removed.
◎ If an au Micro IC Card (LTE) is not inserted,
following operations cannot be performed.
- Making/receiving calls
- Sending/receiving E-mail (@ezweb.ne.jp) and SMS
- Setting PIN code
- Checking own number
- Making emergency calls to 110 (Police), 119 (Fire institution),
118 (Regional Coast Guard Headquarters) and 157 (Customer
Service Center)
◎ Do not insert an au Nano IC Card (LTE) to which a conversion
adapter is attached. Doing so might cause a fault.
Attaching the au Micro IC Card (LTE)
1
Remove the battery pack and cover
2
With the IC (metal) side down, insert the au
Micro IC Card (LTE) at the orientation shown
all the way into the card slot
appears. And the
Advertisement
Table of Contents
