Table of Contents
Advertisement
Charging using the AC adapter (sold separately)
The following describes how to charge the battery pack
using the common AC Adapter 04 (sold separately).
It takes about 150 minutes to charge the battery pack
with the common AC Adapter 04 (sold separately).
1
With the engraved side up, insert the
microUSB plug of the common AC Adapter 04
(sold separately) straight into the microUSB
connection terminal (wider terminal on the
right side) of the product
2
Insert the power plug of the common AC
Adapter 04 (sold separately) into the AC
100 V outlet
Start charging tone sounds and
bar.
When charging is finished,
3
When the charging is finished, pull the
microUSB plug of the common AC Adapter
04 (sold separately) straight out from the
product and the power plug out from the
outlet
30
appears on the status
appears on the status bar.
Charging with a PC
To charge with a PC, USB 3.0 cable (sample) is needed.
Make sure the direction to connect them properly.
Attempting to forcibly connect may cause a damage.
1
With the engraved side up, insert the
microUSB plug of the USB 3.0 cable (sample)
straight into the microUSB connection
terminal of the product
2
Insert USB plug of the USB 3.0 cable (sample)
into the USB port of a PC
appears on the status bar.
When charging is finished,
• If the found new hardware screen etc. appears on the PC,
select "キャンセル (Cancel)".
3
When charging is finished, remove the USB
3.0 cable (sample) from the product and PC
Turning the power on/off
Turning the power on
1
Press and hold
(over one second)
p
The unlock screen is displayed.
■ Initial settings and switching to English mode
The first time the product turns ON, the initial setting
screen appears automatically. Follow the onscreen
instructions to switch to English mode. For details, refer to
the supplied "Setting Guide".
appears on the status bar.
Advertisement
Table of Contents
