How To Attach A Humidifier; Attach A Humid Aire Humidifier - ResMed S8 Compact System User Manual

H
OW TO
A
TTACH A
Please refer to the illustration in section E of the illustration sheet, and your HumidAire 3i
manual.
The H
humidification. No other accessories are required for its use.
Notes:
a. Make sure the water chamber of the HumidAire 3i is empty before you attach or
detach the humidifier.
b. Remove the connector plug on the S8 Compact (see section A of the illustrations
sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.
A
TTACH A
Please refer to the illustrations in section F of the illustration sheet.
To connect your
21" (52 cm) air tubing.
1
Fill the
medium 21" (52 cm) and long 6'6" (2 m) air tubing (F-1), and close the humidifier lid.
2
Place the
the medium air tubing to the air outlet (F-3).
Note: To avoid water spilling into the S8 Compact, do not put it underneath the
humidifier.
3
Assemble your mask system and connect it to the free end of the long air tubing (F-4).
4
Plug the
cord to the socket at the rear of the
outlet.
Please refer to the HumidAire User's Manual for further details.
WARNING
!
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The S8 C
10
A
TTACH A
H A 3 H
i
UMID IRE UMIDIFIER
A 3i attaches to the front of the
UMID IRE
H A H
UMID IRE UMIDIFIER
S8 C
OMPACT
H A water chamber and place inside the
UMID IRE
S8 C on top of the
OMPACT
H A power cord into a power outlet. Connect the
UMID IRE
is now ready for use with the
OMPACT
H
UMIDIFIER
S8 C
to a H A humidifier you need medium sized
UMID IRE
H A (F-2) and connect the free end of
UMID IRE
S8 C and plug the other end into a power
OMPACT
H
UMID
to provide heated
OMPACT
H A . Connect the
UMID IRE
S8 C
OMPACT
A .
IRE
power