Hyundai HYLS7000V User Manual page 6

7 ton
Table of Contents

Advertisement

2.5.2. DO NOT put the log splitter on the ground for operations. This is awkward
operating position that the operator has to bring his face close to the
machine, and thus risks being struck by wood chips or debris.
2.6. Extension leads.
2.6.1. Improper use of extension leads may cause inefficient operation of the log
splitter which can result in overheating. Make sure that the extension lead is
no longer than 10m and its cross sectional area is no less than 2.5mm
sufficient current flow to the motor.
2.6.2. All connections MUST be made with protected material suitable for
outdoor use.
2.7. Avoiding electrical shocks.
2.7.1. You MUST check that the electric circuit is adequately protected and that it
corresponds with the power, voltage and frequency of the motor. The
equipment must be connected to an earthed supply and protected by a 30
mA Residual Current Device (RCD).
2.7.2. NEVER open the pushbutton box on the motor. Should this be necessary
you MUST contact a qualified electrician.
2.7.3. Mark sure your fingers do not touch the plug's metal prongs when
plugging or unplugging the log splitter.
2.8. Keep visitors and children away.
2.8.1. The log splitter MUST be always operated by one person
only. Other people should keep a safe distance from the
work area, especially when the log splitter is under
operations. NEVER use other people to help you with
freeing jammed log.
2.9.
Inspect your log.
2.9.1. Before cutting logs you MUST make sure there are no nails or foreign
objects in logs to be split. The ends of the logs must be cut square. Branches
must be cut of flush with the trunk.
2.10.
Do not over reach.
2.10.1. You MUST not work on slippery surfaces.
2.10.2. You MUST maintain proper footing and balance at all times.
2.10.3. NEVER stand on the log splitter. Serious injury could occur if the tool is
tipped or if the cutting tools is unintentionally contacted. DO NOT store
anything above or near the log splitter where anyone might stand on the tool
to reach them.
2.11.
Avoid injury form unexpected accidents.
2.11.1. DO NOT straddle or reach across the splitting area when
operating the log splitter. NEVER pile logs to be split in a
manner that will cause you to reach across the log splitter. Only
use your hands to operate the control levers. NEVER use your
foot, knee, a rope, or any other extension device. Always pay
full attention to the movement of the wedge ram. Never
attempt to load your log splitter while the ram is in motion. Keep hands out
of the way of all moving parts. NEVER try to split two logs on top of each
other. One of them may fly up and hit you.
Page 6
2
to allow

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents