Ecom Instruments Ex-Handy 05 Safety Instructions page 13

„Connection failed" is displayed.
No incoming calls.
It is not possible to send messages.
No Mailbox.
Mailbox symbol flashes.
30
Check whether you have dialled the
correct number.
If an „E" appears by the network icon,
see problem 4.
Check to make sure you have suffici-
ent credit.
Make sure the SIM card used is com-
patible with the desired service and
that the card is still valid.
Check any restrictions for outgoing
calls and disable these if necessary.
The network may be overloaded. Try
again later.
Try and establish a connection to
check whether the phone is operatio-
nal and ready to receive calls.
Check whether the call divert function
is active (the symbol appears in the
display) and disable this if necessary.
Check any restrictions for incoming
calls and disable these if necessary.
Make sure the number for the
message centre has been entered
correctly (in the menu „Messages >
Options > Message Centre"). You can
obtain the correct number from your
network operator.
Check whether the SIM card used is
compatible with this service.
Check whether the call divert function
to your mailbox is active and that the
correct number (available from your
network operator) has been entered
(menu „Settings > Calls > Mailbox
Number").
Try and establish a connection to
check whether the phone is operatio-
nal and ready to receive calls.
Establish a connection to your mail-
box and listen to your new messages
to make the symbol disappear.