C) Programming 'Set On/Off Times - Rheem 3 Owner's Manual And Installation Instructions

C) Programming 'Set ON/OFF Times' (For Use in 'AUTO' Mode)
Note: A highlighted numeral i.e. 7:00 indicates that the highlighted numeral 7 is
flashing on the display. X:XX is your time setting.
1. Press and release the (Prog) button until 'Set ON/OFF Time' is displayed
flashing on the screen.
2. Press and release the (Accept) button to confirm selection. 'SUN 7:00 – 7:00
Set ON hour' will be displayed on the screen.
3. Press and release the (Up) button until the desired hour appears flashing on
the screen.
4. Press and release the (Accept) button to confirm selection. 'SUN X:XX –
X:XX
5. Press and release the (Up) button until the desired minutes appear flashing
on the screen.
6. Press and release the (Accept) button to confirm selection. SUN X:XX – X:XX
Set OFF hour' will be displayed on the screen.
7. Press and release the (Up) button until the desired hour appears flashing on
the screen.
8. Press and release the (Accept) button to confirm selection. 'SUN X:XX –
X:XX
9. Press and release the (Up) button until the desired minutes appear flashing
on the screen.
10. Press and release the (Accept) button to confirm selection. MON 7:00 –
17:30
11. Continue steps 3 – 8 for Monday through to Saturday. When step 8 is
completed for Saturday the display will automatically revert to the main menu
and the program will be saved.
Note: To program the unit to be in 'OFF' mode for an entire day, set the 'ON' and
'OFF' times to be the same i.e. ON = 0:00 OFF = 0:00.
D) Programming 'Sleep Delay Time
1. 'Press and release the (Prog) button until 'Sleep Delay Time' is displayed
flashing on the screen.
2. Press and release the (Accept) button to confirm selection. 'Sleep Delay Time
OFF' will be displayed on the screen with 'OFF' flashing.
3. Press and release the (Up) button until the desired time setting appears
flashing on the screen. Each consecutive push and release of the (Up) button
increases the time setting in one hour increments up to a maximum of 6
hours. If the (Up) button is pressed and released after '6' is reached 'OFF' will
be displayed and if accepted, the sleep delay timer will be turned off.
4. When the desired setting is reached press and release the (Accept) button to
confirm selection. The display will revert to the main menu and the setting will
be saved.
Set ON minute' will be displayed on the screen.
Set OFF Minute' will be displayed on the screen.
Set ON hour' will be displayed on the screen.
9