Mercury Xi5 Wireless Edition Manual page 23

PRODUCT INSTALLATION, WIRING, AND BATTERY
4. Connect a jumper wire (reference gray) between the negative (–) terminal
on battery C to the positive (+) terminal on battery B.
IMPORTANT: The jumper wire should be the same wire gauge as the
negative (–) and positive (+) power cables.
5. Connect a jumper wire (reference gray) between the negative (–) terminal
on battery B to the positive (+) terminal on battery A.
6. Connect the trolling motor negative (–) lead to the negative (–) terminal on
battery A.
7. Starting with the positive (+) lead, reconnect the battery cables to the
engine starting battery.
d
Battery A
36-volt battery connection
a - Power cables to trolling motor
b - Manual reset circuit breaker
c - Jumper wire (not supplied)
d - Negative (–) battery terminal
IMPORTANT: Do not connect a common ground bond cable between 36‑volt
and 12‑volt electrical circuits.
eng
INFORMATION
c
Battery B
c
Battery C
17
BLK
c
b
37825
a