Mercury Xi5 Wireless Edition Manual page 17

PRODUCT INSTALLATION, WIRING, AND BATTERY
8. Grab onto the motor column and raise the unbolted side of the deck
mounting bracket. Install the bolts through the deck mounting holes while
holding the deck mounting bracket at an angle. Holding the deck
mounting bracket at an angle allows the bolts to be installed with less
interference from the foot release mechanism. Install a washer and a
nylock nut onto each bolt.
9. Align the trolling motor with the mounting holes in the deck. Hold the
mounting bolts securely with a 7/16 in. wrench while using a wrench or
socket to tighten the nylock nuts on both sides of the deck mounting
bracket from under the deck.
10. Install the side panels onto the trolling motor, taking care not to damage
the locating tabs. Install the side panel screws.
b
a - Side panel screws
b - Locating tab
eng
INFORMATION
a
a
11
53451
53446