Brother DCP-1600 User Manual page 31

Chapter 1
2.Fax (For MFC-1910W)
Level 2 Level 3
1.Setup 1.Receive
Receive Mode
(In FAX mode
only)
2.Ring Delay
The factory settings are shown in Bold with an asterisk.
24
Descriptions 1 Options
Chooses the receive
Fax Only*
mode that best suits
your needs.
Fax/Tel
External TAD
Manual
The Ring Delay
(00 - 02)
setting sets the
02*
number of times the
machine rings before
it answers in Fax
Only and Fax/Tel
modes.
Descriptions 2 Page
Your machine 57
automatically
answers every call as
a fax. Fax Only is
displayed on the LCD
when set.
Your machine
controls the line and
automatically
answers every call. If
the call is not a fax,
the phone will ring for
you to pick up the
call. Fax/Tel is
displayed on the LCD
when set.
Your external
telephone answering
device (TAD)
automatically
answers every call.
Voice messages are
stored on the
external TAD. Fax
messages are
automatically printed.
External TAD is
displayed on the LCD
when set.
You control the
phone line and must
answer every call
yourself. Manual is
displayed on the LCD
when set.
If you have external 58
or extension
telephones on the
same line as the
machine, choose the
maximum number of
rings.