Brother DCP-1600 User Manual page 21

Chapter 1
0.Initial Setup (For MFC-1910W) (continued)
Level 2 Level 3
—
3.Dial Tone
4.Dial Prefix —
5.Reset 1.Machine
Reset
2.Network
3.Address &
Fax
4.All
Settings
The factory settings are shown in Bold with an asterisk.
14
Descriptions 1 Options
You can shorten the
Detection
dial tone detect
pause.
No Detection*
Sets a prefix number —
that will always be
added before the fax
number every time
you dial.
Restores all the
1.Reset
function settings to
2.Exit
factory default.
Restores all network
1.Reset
settings to the factory
2.Exit
default.
Restores all stored
1.Reset
phone numbers and
2.Exit
fax settings.
Restores all the
1.Reset
machine settings to
2.Exit
factory default.
All Settings takes
less time than
Factory Reset.
Descriptions 2 Page
Your machine will
dial as soon as it
detects a dial tone.
When you send a fax
automatically, by
default your machine
will wait for a fixed
amount of time
before it starts to dial
the number.
Enter the prefix
number (up to 5
digits) on the dial
pad, and then press
OK.
The dial prefix setting
will automatically dial
a predefined number
before every fax
number you dial. For
example: If your
phone system
requires a 9 to dial an
outside number this
setting will
automatically dial 9
for every fax you
send.
Cancel restore and
exit the menu.
Cancel restore and
exit the menu.
Cancel restore and
exit the menu.
Cancel restore and
exit the menu.