Hardware Description - D-Link DVG-5004S User Manual

DVG-5004S User's Manual

1-2 Hardware Description

Front Pannel
Indicators
Power: Power LED. A steady light indicates a proper connection to a power source.
Prov./Alm.: A blinking light indicates the VoIP Gateway is attempting to connect with the Provisioning
server or DVG can't get IP from DHCP or PPPoE Server. Once the service connects, the LED will turn off.
The LED will light solid red if the self-test or boot-up fails.
Reg.: The Reg. LED will turn on when the VoIP Gateway is connected to a VoIP service provider. The LED
will blinking if not connected to a service provider.
WAN: When a connection is established the 10 or 100 LED will light up solid. The LED will blink to indicate
activity. If the 10 or 100 LED does not light up when a cable is connected, verify the cable connections and
make sure your devices are powered on.
LAN: When a connection is established the 10 or 100 LED (bottom) will light up solid on the appropriate
port. The LEDs will blink to indicate activity. If the 10 or 100 LED does not light up when a cable is
connected, verify the cable connections and make sure your devices are powered on.
Phone:
Green Blinking – FXS is alerting (ringing) for an inbound call.
Green Solid – The line is in use.
Red Solid – As users execute "Status-> FXS Line Diagnostic" and there is some error on the FXS port.
D-Link Systems, Inc.
Telephone Interface Description
5