Caller Filter - D-Link DVG-5004S User Manual

DVG-5004S User's Manual

3-4-6 Caller Filter

This function allows you to accept or reject any incoming call from the IP address listed in the filter rule. The
call from the IP address of SIP proxy server is always accepted, despite Deny is selected or the IP address
of SIP proxy server is not in the filter rule of Allow.
Advanced Setting → Caller Filter
Caller Filter: It is to allow or deny the filter rule.
Status: It is to show the status of enable or disable.
Filter IP Address: Enter the start IP address which you would like to Allow or Deny.
Subnet mask: Enter the subnet mask you would like to Allow or Deny.
D-Link Systems, Inc.
VoIP Gateway Configuration
56