Hardware Description - D-Link DVG-6004S User Manual

DVG-6004S/6008S User's Manual

1-2 Hardware Description

Front Panel
DVG-6004S
DVG-6008S
Power Indicator: green light indicates a normal power supply.
Run Indicator: blinking green light indicates normal operation.
Alarm Indicator: when the system starts up, the red light will blink. This indicator will also light to indicate any
abnormal gateway behavior.
L1 – L8 stands for Port 1 – Port 8: Connect to your original telephone line on the wall jack with RJ-11 cable.
WAN Indicators: indicate connection and activity on the WAN Ports.
L1 – L4 Indicators: indicate connection and activity on LAN Port 1 – 4.
When starting up the system, the Alarm, Run, and Power indicators will light up. After about 40
seconds, the Alarm indicator will go off, the Run indicator will blink green, and the Power indicator
will stay green (under normal operating conditions). If the Alarm indicator continues to blink, then
the system is attempting to connect with your ISP and has yet to obtain an IP address.
Once the WAN is connected, the WAN indicator will light up green and, if data is being transmitted
over the Internet, the indicator blinks green and orange.
D-Link Systems, Inc.
This Manual: http://www.manuallib.com/file/2602385
Hardware Description
2