Controls And Instruments - Stiga SD 98-108 Owner's Manual

4. CONTROLS AND INSTRUMENTS

4.1
4.2
4.2a
4.6
4.32
4.1 STEERING WHEEL
Turns the front wheels.
4.2 THROTTLE
This regulates the engine's r.p.m. The positions
are indicated on a plate showing the following
symbols:
4.2a
4.2
«CHOKE» cold starting
«SLOW» for minimum engine speed
«FAST» for maximum engine speed
– The «CHOKE» position enriches the mixture
so must only be used for the time necessary
when starting from cold.
– When moving from one area to another, put
the lever in a position between «SLOW» and
«FAST».
– When cutting, shift into «FAST».
4.21-4.31
4.31
4.2A CHOKE CONTROL (IF FITTED)
It enriches the mixture and must only be used for
4.5
the necessary time for cold starting.
4.3
1
4.4
4.22
4.3 KEY IGNITION SWITCH
This key operated control has four positions:
«OFF» everything
is switched off;
«HEADLIGHTS
ON» (if fitted);
«ON» activates all
parts;
«START» con-
nects the starter
motor.
– If you release the key
on «START», it will
automatically return
to «ON».
– After turning the engine on, turn the lights
on (if fitted) by turning the key to the
«HEADLIGHTS ON» position.
– to switch them off, turn the key to «ON».
4.4 PARKING BRAKE
This brake stops the machine from moving when
it has been parked.
There are two positions:
4.3
EN 11