Advertisement
8. CONTROLS AND INSTRUMENTS
The machine includes the following controls:
1) Steering wheel
2) Parking brake
3) Adjusting the longitudinal seat
4) By-pass lever
5) Plate height adjustment
6) Elevator activating basket
9. ASSEMBLING THE EQUIPMENT
9.1 ASSEMBLING THE MULCHING PLATE
1) Let the lifting arms of the engine couple with the attachments present on the equipment
2) Insert the locking pins and the safety split pins
3) Loosen the belt tensioner.
4) Mount the belt.
9.2 ACCESSORIES ASSEMBLING
For accessories assembling, refer to the separate installation guide supplied with each accessory
9.3 SEAT ASSEMBLING
1) The seat is supplied already assembled with the upper guides.
2) Connect the micro of the seat with the electrical system connector.
3) Slide the seat from the front of the rails bolted to the plate.
4) Screw the travel stop screw forward.
10. USING CONTROLS AND INSTRUMENTS
10.1 FORWARD - REVERSE
10.2 PARKING BRAKE
10.3 BY-PASS
IMPORTANT:
Avoid towing the machine for long stretches with inserted by-pass.
10.4 HAND THROLLE
10.5 P.T.O
See figure 10.5
1) To INSERT the PTO push up the Red Security tab and, simultaneously, PRESS the button.
2) To disengage the PTO PRESS Again the button.
10.6 PLATE HEIGHT ADJUSTMENT
Pay attention to possible crushing, use the special lifting handles.
10.7 BASKET LIFTING
10.8 FUEL TAP
See figure 10.8
10.9 PLATE HEIGHT ADJUSTMENT
10.10 TOW HOOK
See figure 10.10
11. WIRING DIAGRAM
11.0 COLOUR PALETTE
G
Yellow
A
Sky-blue
H
Grey
B
White
L
C
Blue
Orange
See figure 8.
7) P.T.O. and turbine engagement
8) Acelerator
9) Lever for lifting the equipment
10) Light switch
11) Switch key
12) Fuel tap
See figure 9.1
See figure 9.2
See figure 9.3
See figure 10.1
See figure 10.2
See figure 10.3
See figure 10.4
See figure 10.6
See figure 10.7
See figure 10.9
M
Brown
N
Black
R
Red
13) Forward speed pedal - reverse gear
14) Engine choke control
15) Hourmeter
16) Vain clean tunnel
S
Pink
V
Green
Z
Violet
THIS SIMBOL INDICATE
THE EARTH
EN
31
Advertisement
