Safety-Related Warning - Sony KDL-46NX810 Service Manual

SAFETY-RELATED WARNING
USE CAUTION WHEN HANDLING THE LCD PANEL ASEMBLY
When repairing the LCD Panel Asembly, be sure you are grounded by using a wrist band.
When installing the LCD Panel Asembly on a wall, the LCD Panel Asembly must be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of high humidity for an extended period of time.
4) Do not expose the LCD Panel Asembly to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within the module.
6) Disconnect the AC power when replacing the backlight or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD Panel Asembly with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).
10) During the repair, DO NOT leave the Power On for more than 1 hour while the TV is face down on a cloth.
KDL-46NX810/55NX810/55NX811/60NX810 7