Sony KDL-46NX810 Service Manual page 11

SPECIAL HANDLING INSTRUCTIONS WHEN REPLACING THE LCD PANEL ASSEMBLY
Use the following precautionary guidelines when handling the LCD Panel Assembly to avoid material degradation or screen coating
degradation, and ensure that dust, dirt, or fingerprints are not left between the glass and the LCD Panel Assembly.
1. After removing the boards and connectors, note where the frame is on the panel. (See Figure 1)
2. Lift the LCD Panel Assembly by holding the top and bottom of the panel approximately 200mm from the edge with your palms on the
back of the panel. (See Figure 2)
CAUTION: Lifting or holding the panel at the corners may damage the panel.
3. Use the same method when taking the replacement panel out of the carton. (See Figure 3)
CAUTION: DO NOT lift the LCD Panel by holding the short side of the panel or by placing your palms on the front glass.
(See Figures 4 & 5)
KDL-46NX810/55NX810/55NX811/60NX810
Figure 1
Figure 4
WARNING AND CAUTIONS
Figure 2
Figure 5
Figure 3
6