HP ep9010 Series User Manual page 48

Adjusting the projector
Picture menu (Continued)
Widescreen input
VGA settings...
Auto-sync
Frequency
Tracking
Vertical offset
Horizontal offset
Picture Mode
Customize picture
mode...
Picture enhancement
Color temperature
Stretch
Picture shift
Reset picture shift
Reset this picture
mode
48
Sets whether a widescreen (16:9) input device is in use.
Adjusts the height of the picture accordingly.
Adjusts settings for a computer input.
Resynchronizes the projector to the input signal. This
can compensate for any change in the signal.
Adjusts the timing of the projector relative to the
computer.
Adjusts the phase of the projector relative to the
computer.
Adjusts the picture up or down within the projection area.
Adjusts the picture left or right within the projection area.
Adjusts color and picture settings to one of several
combinations designed for different types of viewing
situations. You can use a different picture mode for each
source or each viewing environment. You can also
customize each picture mode.
Changes settings associated with the current picture
mode.
Refines the color, lightness, and other characteristics of
the picture.
Shifts colors toward red or blue.
Selects how the picture fits on the screen:
■ Best fit automatically fits the picture without stretching
it.
■ 1-to-1 shows each picture dot as one projected dot.
■ Reduced fits a standard-shape picture onto a
widescreen projection screen.
Moves the picture within the projection area. This is
useful if you are viewing a picture that is smaller than the
full projection area, such as a widescreen movie.
Resets the picture shift to zero (centered).
Restores the current picture mode to its default settings.
User's Guide