Adjusting The Projector Setup; Using The On-Screen Menu; Changing Settings Using The On-Screen Menu - HP ep9010 Series User Manual

Adjusting the projector

Adjusting the projector setup

1. Press menu, and go to Setup.
2. Set the setup adjustments as needed.
From the Setup menu, you can select settings, such as menu language,
projector position, and menu timeout.
To get descriptions for all available setup adjustments, see "Setup menu" on
page 49.

Using the on-screen menu

Changing settings using the on-screen menu

You can change the on-screen menu settings with the buttons on either the
projector or the remote control.
1. Press menu on the projector or remote control. This displays the on-screen
menu.
2. Press up
to move into that menu.
3. Press up
adjusting the setting.
4. Press left
prompted.
5. Press ok to return to the menu.
6. To go to a different menu, press left
7. To close the on-screen menu, press menu.
If you do nothing for a period of time, the on-screen menu closes. To change the
amount of time until the on-screen menu closes, press menu and select Setup >
Timeout for menu.
✎
To exit from any on-screen menu or adjustment, press the menu button.
46
or down to highlight the desired menu icon, then press right
or down to highlight that setting, then press ok to begin
or right , or press up or down , to adjust the setting, as
and select a menu.
User's Guide