Playing A Dvd - HP ep9010 Series User Manual

Playing DVDs and CDs
The following types of media are supported: DVD-ROM, DVD-R, DVD+R,
DVD-RW, DVD+RW, CD-R, and CD-RW. Recording conditions might affect
whether individual discs are playable.

Playing a DVD

1. Press the DVD eject
tray.
2. Place the DVD on the tray.
3. Press the DVD eject
it turns on and starts warming up. Then it starts playing the DVD.
4. If a DVD menu displays, press the navigation buttons to make a selection,
and then press ok.
5. Press the play/pause
6. Press the stop
7. Press the eject
press it again to close the tray.
If you want to adjust the picture, see "Changing the picture mode" on page 33.
✎
The internal DVD player and all DVDs are coded with a DVD region code.
These codes must match to play the DVD. If the DVD code does not match
the player's code, the DVD does not play and the projector displays an error
message.
38
button on the projector or remote control to open the
button again to close the tray. If the projector is off,
button to pause or resume playing.
button to stop playing.
button to open the tray and remove the DVD, and then
User's Guide